No.
3 - 1mm (.039") Fine to Medium output (Standard on the Super Model and the Q3 System)
Most 'fine-finishing'> Water-Based Lacquers,
Nitrocellulose Lacquers, Sealers, Cellulose, Acrylics, Synthetics,
Polyurethane, Stains, Varnish, Glitter Paints, Primers.
No. 3 Set-Up $69.95.
No.
4 - 1.4mm (.055") Medium Output (Standard
on the Q4 System)
Similar to No. 3 but more coverage. Especially
suitable for Automotive Enamels, Nitro-Cellulose Lacquer and Latex
where finer finish is required such as louver doors, trim, cabinets.
No. 4 Set-Up $69.95.
No.
5 - 2mm (.079") High Output
Larger surfaces, thick layers, spotted effects.
Sealers, Varnish, Polyurethane, Oil Base Paints, Enamels, Epoxy,
Plastic, Adhesives, Floor Paving Paints, Latex (on walls, ceilings)
etc. No. 5 Set-Up $69.95.
No.
6 - 3mm (.110") High Output
Very heavy flows, fast coverage. Stone Finish
Paints, Texture Coating, Industrial Primers, Latex (on walls,
ceilings) etc. No. 6 Set-Up $69.95.
