Cup Maintenance Kit
This kit includes:
3 One Way Check-Valve
3 Gasket
2 Cup Diaphragms
These are the most widely replaced parts that we recommend everyone should have on hand.
This kit is only $23.85
One Way Check-Valve
New improved 'duck-bill' type check valve makes it easier to replace on spray gun.
These One Way Check-Valves include the pressure tubes to prevent paint entering the spray gun from the cup.
I personally recommend that you have extra of these on hand at all times.
Comes in packages of 5 for $16.75
Cup Diaphragms
These Plastic Cup Diaphragms help prevent paint from entering the spray gun through the pressure tube.
Comes in package of 3 for $11.95.
Cup Lid Gasket
This seals the cup and the lid, and prevents the paint from dripping out. Over time these tend to dry up and needs to be
replaced.
Must be used with plastic Diaphragms.
Comes in packages of 5 for $16.
Cup Lid Gasket which are for the Fuji spray guns that do not have a plastic Diaphragms.
Comes in packages of 5 for $16.
Spray Gun Paint Strainers
Inexpensive nylon strainer fits at the end of the metal fluid tube. Durable and long-lasting. Can be soaked in thinner to
clean.
Come in packages of 10 for $11.75
Mini 3-cup Set
Complete 1/2 pint (8ozs) miniature cup assembly. Supplied with 2 extra cups and 3 heavy-duty lids equipped with
gaskets.
This assembly is lightweight taking weight off the wrist. The small size allows
access into confined areas such as cabinets, bookshelves etc. Cup is pressurized so spray pattern is always perfect. You will think of
many uses for these cups, storing paints, stains. Quick color changes. Any type of touch-up work.
This complete
set is only $49.95
(Gun not
included)
Mini Cup with Lid
Extra Mini Cup with Lid. Great for storage. $9.95
6-foot Flex Whip Hose
Lightweight 6ft. flexible hose is highly flexible. Takes weight off the wrist and flexibility allows for effortless
maneuverability of the spray gun. An added feature is that the air through the spray gun is not as hot (due to the fact the spray
gun is now 6ft further from the turbine). This often alleviates problems with fast drying lacquers drying too quickly.
This 6-foot Flex Hose is only $37
Turbine Air Filter
The filter on the Fuji turbine should be kept clean.
Filters for the Super PRO Model
(Also used for the Super turbines)
Comes in a set for $9.20
Filter for the Q-Series™ PRO
(Also used for the Q-Series turbines)
Each filter $7.25
Needle/Nozzle/Air Cap Set-Up
No. 3 - 1mm (.039") Fine Output
Water-based Lacquers, Nitrocellulose Lacquer, Sealers, Cellulose, Acrylics, Synthetics, Polyurethane, Stains. No. 3
Set-Up $69.95.
No. 4 - 1.4mm (.055") Medium Output
(Standard on all Systems)
Similar to No. 3 but more coverage. Best for Automotive Enamels, Nitro-Cellulose Lacquer and Latex where finer
finish is required such as louver doors, trim, cabinets. Also ideal for Varnishes, Primers, Oil-Based Paints and Stains. No.
4 Set-Up $69.95.
No. 5 - 1.8mm (.070") High Output
Larger surfaces, thick layers, spotted effects. Sealers, Varnish, Polyurethane, Oil Base Paints, Enamels, Epoxy,
Plastic, Adhesives, Floor Paving Paints, Latex etc. No. 5 Set-Up $69.95
No. 6 - 2.2mm (.086")
Extra High Output
Very heavy flows, fast coverage. Stone Finish Paints, Texture Coating, Industrial Primers, Multi-Fleck Paints,
Latex (on walls, ceilings) etc. No. 6 Set-Up $69.95.
Needle/Nozzle/Air Cap Kit
Complete Set
Have a complete set. This includes the No. 3, No. 5, and No. 6 Needle/Nozzle/Air Cap Set.
This is one thing you'll be thankful to have especially at the most unexpected times, for the most perfect finish.
Save $30.00 compared to purchasing them individually.
Complete your sets for only $179.85
Fuji XT Turbine Spray Gun with Cup (for Turbine)
The new Fuji XT Spray Gun is non-bleed, which means that air only passes through the spray gun when the trigger is
pulled. This means less blowing around of shop dust and less paint paint buildup on the tip of the fluid nozzle.
The spray gun features a stay-cool nylon handle, stainless steel fluid passages and an external
needle packing adjustment. Obtain a professional finish with all known coatings.
The standard Air cap set is the general purpose #4 for fine finishing with lacquers, enamels,
polyurethane, latex, water based coatings and more.
This Fuji XT Turbine Spray Gun can be used with any turbine from any maker that has a bleeder
attachment on the turbine to protect the turbine motor.
(Please note: This is not designed to work with a regular compressor.)
$259 complete.
Quart Cup Assembly
This comes complete with the cup gun assembly and the 1 quart cup. $39.50
Aluminum 1 Quart Cup Only
Teflon Coated. $24
Non Teflon $24
Caps for Cup
These caps fit any Fuji 1 quart cups.
These are really handy for storing paints.
Comes in packages of 3 for only $4
This controls the amount of air going to the spray gun. (Quick Connect Coupling not included)